NP Adaptors

NEW PRODUCT
What a fantastic idea!

The Hawk-Woods APD Power Distribution Adaptor provides a massive amount of power from industry standard NP batteries.

Designed as a convenient alternative to a battery box, or similar heavy duty power source, the APD uses up to 6 NP1s and provides 12V regulated outputs via four female XLR's and four Hirose sockets which are switched in pairs.

The power potential with this piece of equipment is phenomenal; if six Hawk-Woods NP70 batteries are inserted, there is 420 Watts of available power.

Hawk-Woods NPA Power Adaptors are the most basic of all the power adaptors.

They are suitable for most mixers or DAT recorders and are often used as a charge adaptor.

The NPB range of adaptors form part of our extensive range of adaptors for sound recordists. No more expensive throw away batteries!

Using a Hawk-Woods' Power Adaptor and an NP-29 battery you can now power a sound mixer all day.

All fuses on our NPB adaptors are rated to 1.1A (continuous hold current) and if the current should rise to about 1.7A or more then the output will go high resistance rendering the adaptor safe until such time as the excessive load is removed.

The NPC Power Adaptor has all the benefits of the NPB range but is supplied in a different format and is the most accessible when used vertically in a sound bag.

All fuses on the NPC adaptors are rated to 1.1A (continuous hold current) and if the current should rise to about 1.7A or more then the output will go high resistance rendering the adaptor safe until such time as the excessive load is removed.

NPU adaptors have been designed to be used with the battery standing on its end with the adaptor on top. This gives easy access to the two featured switches and LED indicator. The NPU has fully regulated outputs, a voltage selector switch allows the user to select between either 9.6 or 12 volts, depending on specific equipment being powered.