 SQN TAJIMI CABLESThe TAJIMI connector is a 12-pin 'push-fit' connector favoured on the newer SQN mixers. |
 |
SQN - Straight 4m Tajimi Mixer / Camera Tails SET
Price: £130.00 (Excluding VAT at 20%)
Return Monitor PlugPlease select (3.5mm standard, others add £6)
|
|
Two section cable loom to interface 12-way Tajimi socket of SQN-4S_mini, SQN-2S, SQN-5S or SQN-4S series IV/IVe with Betacam including monitoring return (length 4m)
Note: Camera/Recorder interface cables normally have a stereo 3.5mm minijack monitor plug, but optionally may be specifically ordered with XLR-5F or twin RCA phono connectors at an added cost of £6
|
 |
SQN - Coiled Tajimi Mixer / Camera Tails SET
Price: £136.00 (Excluding VAT at 20%)
Return Monitor PlugPlease select (3.5mm standard, others add £6)
|
|
Two section cable loom to interface 12-way Tajimi socket of SQN-4S_mini, SQN-2S, SQN-5S or SQN-4S series IV/IVe with Betacam including monitoring return (length 4m)
Note: Camera/Recorder interface cables normally have a stereo 3.5mm minijack monitor plug, but optionally may be specifically ordered with XLR-5F or twin RCA phono connectors at an added cost of £6
|
 |
SQN - Camera tails - TAJIMI
Price: £66.00 (Excluding VAT at 20%)
Return Monitor PlugPlease select (3.5mm standard, others add £6)
|
|
Tajimi 12 pin to 2 x XLR3M with a choice of connectors for tape return.
View 5 pin XLR camera return tails
|
 |
A straight 4m Tajimi 12 pin Male to Tajimi 12 pin Female mixer umbilical cable.
(Cable only, no camera tails)
|
 |
A colied 4m Tajimi 12 pin Male to Tajimi 12 pin Female mixer umbilical cable.
(Cable only, no camera tails)
|
 |
Short adaptor cable to interface the SQN-5S Series II second camera connections to a standard connecting cable. XLR-5F + 3.5mm Jack -> Tajimi
|
 |
 10-PIN HIROSE CABLESThese cables are made using 10-pin 'screw-fit' HIROSE connectors. |
 |
10pin Hirose to 10pin Hirose mixer to camera cable. Standard Filmtech, Audio Developments, SQN pin configuration. |
 |
10pin Hirose to 10pin Hirose mixer to camera cable. Approximately 3m fully extended. Standard Filmtech, Audio Developments, SQN pin configuration.
|
 |
Camera tails - HIROSE
Price: £53.00 (Excluding VAT at 20%) Return Monitor PlugPlease select (3.5mm standard, others add £6)
|
|
Hirose 10 pin to 2 x XLR3M with a choice of connectors for tape return. |
 |
Adapts the output of the Sound Devices Mix-Pre or 302 to a standard Hirose 10 pole multipin connector.
|
 |
Sound Devices 788 Umbilical |
 |
This is a custom made umbilical to allow the 788T to be used as a location mixer when recording onto DigiBeta etc.
It carries balanced audio to the camera on XLR, has a 3.5mm stereo monitor return and TC
The connectors for the mixer/recorder end are TA3 and 5pin-lemo for time code.
When you use this cable you can still work as you normally would sending a stereo mix to camera but multi-track all of your sources to disk at the same time.
The only drawback is that you will need to sacrifice 1 or 2 inputs on the 788T for your camera return, but you might want to use those tracks to keep a backup of your mix anyway!
This cable opens up the possibility of a complete new way of working when shooting single camera on location - we are sure you will be blown away with the possibilities!
|
 |