From the Rycote stable - a foam wind gag for shotgun mics.
Suitable for the following microphones:- Sennheiser MKH 60 Sony ECM 672 |
 |
From the Rycote stable - a foam wind gag for shotgun mics.
Suitable for the following microphones:- AKG C 568 EB, CK 68 ULS C460B Red Azden SG(M)-1X BeyerDynamic MCE 87vs, MC 836, MC 716, MC 726, MCE 86 N (C) S, MC 736 ClockAudio C850EDPA 4017 JVC DY-70U Røde NTG-3 Sanken CS 3 Sennheiser MKH 416, MKH 418, ME 66 K6, ME 80 K3USony ECM 680S, ECM 670, ECM 678 |
|
From the Rycote stable - a foam wind gag for camera mics.
Suitable for the following microphones:- SONY BVP5/BVP, BVP537, BVW |
|
The Hot Shoe Extension allows you to fit multiple attachments such as lights and additional mics to your single hot shoe on your camera/camcorder. Because the Hot shoe Extension can rotate 360° around the shoe fixture on the camera, your microphone can be easily moved out of shot and also adjusted to achieve the optimum balance. This essential, yet affordable accessory is a must for all videographers.
|
|
A new and improved version of the stereo Back-to-Back clips are available now! The new clips are capable of holding 19-25mm diameter mics, and slab-sided MKH microphones in M/S stereo as before - but now have a soft grip surface on the internal edges to prevent microphones from slipping or rotating inside the clips.
|
|
A pair of Universal Standard Lyres, Small & Medium Suspension (Black), with Modular Bar Adaptor & Screws.
|
|
2 x universal lyres, 2 x MKH lyres (black), with modular bar adaptor, screws and hard-wired Connbox 1
|
|
(Black, 62 shore) softer clips, ideal for compact, lighter mics, such as the MKH 8040, 8050 and even 8060.
|
|
(Black, 68 shore) with modular bar adaptors and screws, for Small & Medium Suspensions (Windshield Kits 1 to 5)
|
|
(Grey, 72 shore) with Modular bar adaptors and screws. For larger suspensions
|
|
A pair of Universal Standard Lyres, Small & Medium Suspension (Black), for repairing/upgrading the pre-modular suspension systems.
|
|
This is the new recommended 'softie' Lyre Kit for the Windshield Kits 6, 7 and 8
The suspension offers better isolation, better grip, and limits excessive movement of the microphone.
Ideal for MKH816 or MKH 70
This is the Lyres only, no bar and no conbox is included in this kit. Other options are available with bar/conbox if you need the whole shabang.
Please note, this is only suitable for existing Lyre based kits. You can not upgrade an old 816 style (U/elastic suspension) to Lyre
|
|
The Rycote connbox is designed to reduce cable borne handling noise. The box mounts on the suspension bar and flying leads go to the microphone and pistol grip. This CB1 model is the new hard-wired version and is for use with mono microphones with a 3 pin XLR.
Bigger Picture...
|
|
For use with longer shotgun microphones (eg MKH816) with a 3 pin XLR. |
|
For use with most stereo rigs with a pair of 3 pin XLR's |
|
For use with single shank stereo microphones with a 5 pin XLR |
|
For use with a single Schoeps CCM microphone with a Lemo connector in a mono extended ball gag.
|
|
For use with an MS pair of Schoeps CCM microphones (Lemo connectors) in a mono extended ball gag. |
|
For use with an MS or XY pair of Schoeps CCM microphones (Lemo connectors) in a stereo extended ball gag. |
|
For Schopes CMIT-5U + CCM MS with XLR and Lemo Tail |
|
|
|
Rycote's Extension Handle has been designed to allow products with a female 3/8" thread, i.e. portable audio recorder or camera to be either hand-held or mounted on a 3/8" male thread, such as a microphone stand or boom pole.
Thanks to its ergonomic, soft-grip feel, the handle can be used to comfortably hand-hold recording devices, and can be used together with our Portable Recorder Suspension, or InVision Broadcast suspension mounts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Please specify when ordering for which model basket the filler strip is for. Thank you
|
|
