The DC-5D1 is a dummy battery adaptor for the Canon EOS D5/D7. Attached to a cable mounted 2-Pin Power-Con (D-Tap), it allows the user to power an EOS Camera from an external broadcast battery source.
Now prominently used in HD recording and time-lapse photography, these cameras can now be powered from V-Lok (and other) types of battery. The advantages of using a single high capacity battery over dozens of standard Canon LP-E6 batteries are obvious.
The DC-5D1 just needs to be plugged into a D-Tap power socket on a suitable battery fitting, like our DC-CA5 Canon Power Boxes. The dummy battery contains an 8.4V regulator, so is compatible with any output distributing 10-20V.
SPECIFICATIONS
Dimensions HxWxD(cm): 45cm Cable
Output: 8.4V Regulator Fitted
Input Plug: Cable-Mounted 2-Pin Power-Con
|
 |
This V-Lok power distribution box has been designed for users of Canon EOS cameras. Compatible with our range of V-Lok Lithium-Ion batteries, the VL-DC5X features five Power-Con (d-tap) sockets. These will provide the user with 12V regulated power distribution.
As well as running the camera via the above Power-Con dummy battery adaptor, the VL-DC5X can provide power to additional on-board or nearby equipment.
The VL-DC5X has a metal base which can be custom machined to suit the user's requirements. So if you are looking to attach it to a rig, then this can easily be achieved.
SPECIFICATIONS
Dimensions HxWxD(cm): 2.7 x8.5 x15.5
Weight: 190g
12V Regulated Output
5x Power-Con Sockets
V-Lok/V-Mount Battery Compatible
LED Power Indicator
On/Off Power Switch
|
|
The DC-15A is a Rod mounting kit for use with our VL-DC5 and VL-DC5X Power Distribution Boxes. The kit features a 15mm (60mm pitch) rod clamp and two attaching plates. These screw fitting plates allow the VL-DC adaptors to be mounted horizontally or vertically on the Rods, depending on the users preference.
COMPATIBILITY
15mm / 60mm pitch rod compatible
Screw fits to VL-DC5 / VL-DC5X
|
|
The DC-A1 allows users of the 'Handy SLR' to mount the Hawk-Woods VL-DC5 or VL-DC5X V-lok Power Box to the system. The mounting kit features two plates that that can be used to mount additional equipment under the Box.
|
|
As the above, the DC-5D2 is a dummy battery adaptor for the Canon EOS D5/D7. Attached to a cable mounted 4-Pin Hirose Male plug, it allows the user to power an EOS Camera from an external broadcast battery source.
SPECIFICATIONS
Dimensions HxWxD(cm): 45cm Cable
Output: 8.4V Regulator Fitted
Input Plug: Cable-Mounted 4-Pin Hirose
|
|
The HB-5D is a variation of the popular Hawk-Woods Hot-Bloc. The Hot-Bloc will mount to a standard camera hot-shoe and provides three additional shoe mounts. This allows multiple on-board equipment to be mounted on the camera.
The HB-5D Hot-Bloc features a Sony NF-F type battery fitting and a cable mounted Canon EOS dummy battery. As well as the additional mounts provided, the user can enjoy the prolonged run-time provided by these high capacity batteries. We recommend using the Hawk-Woods Sony replacement DV-F980 with the adaptor.
SPECIFICATIONS
Dimensions HxWxD(cm): 5 x9 x2.4
Weight: 105g
Nominal battery voltage provided
3x hot-shoe mounts
Canon EOS D5 / D7 compatible
|
|
The DV-F980 offers a higher capacity output. The DV-F980 is a 52Watt battery delivering an output of 7200 milliamps. This give the user more run time. As with all Hawk-Woods NPF replacement batteries they fully support the INFO technology Sony relies on to display the battery usage. This Hawk-Woods Mini DV battery can be charged by any F-series compatible Sony charger, as well as Hawk-Woods own 2, 4 & 8 Channel versions.
SPECIFICATIONS
Dimensions HxWxD(cm): 7 x3.8 x 6.2cm
Weight: 309g
Output: 7.2V 7200mA
Cells: Lithium-Ion
Lithium-ion content: 4.20g
Operating temperature: -20~50C
Discharge and voltage protection
Sony NP-F product compatible
|
|
The DV-MC2 is a 2-Channel simultaneous fast charger that will charge two Mini DV batteries in under 5 hours. It has been designed for use with our own DV-F970/F980 batteries and is also 100% compatible with the Sony NP-F series.
Cable available for in-car (12V) use.
SPECIFICATIONS
Dimensions HxWxD(cm): 6 x12 x9
Weight: 295g
Charging Channels: 2
Compatible Batteries: Sony NP-F / Hawk-Woods DV-F
Mains Input: 90~260VAC
DC Input: 10~15V
LED charging display
Under 5hr charging times
|
|
The Hot Shoe Extension allows you to fit multiple attachments such as lights and additional mics to your single hot shoe on your camera/camcorder. Because the Hot shoe Extension can rotate 360° around the shoe fixture on the camera, your microphone can be easily moved out of shot and also adjusted to achieve the optimum balance. This essential, yet affordable accessory is a must for all videographers.
|
|
A simple, but robust universal camera bracket for mounting wireless receivers onto camcorders or DSLR cameras.
The bracket can be mounted to either the camera 1/4" mounting point (if available) or the flash shoe. The bracket holds the receiver(s) on four soft grip pads, held down by the use of two back to back Velcro straps.
Suitable for most portable wireless receivers.
(NB Radio mic NOT included!)
|
|
Rycote Universal Camera Kit
Launched in September 2009, the Universal Camera Kit is a high-tech shock mount attachment to video cameras, camcorders, booms and stands.
Rycote’s noise reduction technology is the professional’s choice for outside broadcast, film and TV documentary.
The Rycote Universal Camera Kit is able to bring the benefits of this technology to video production in the form of a complete, camera mountable, wind and handling noise reduction system.
The Rycote Universal Camera Kit is the essential accessory for achieving good, clean, audio recordings to professional standards, for outside filming using a shotgun or rifle camera mounted microphone.
We are quite impressed here at Soundkit with the comprehensive kit of parts included in this box... click on the link below to find out more about what is included in the box...
What is in the box!
Universal Camera Kit Instructions (PDF)
|
|
|
|
This is suitable for mics up to 12cm in length. Here is a list of some of the compatible mics | 12cm Camera Kit | | Manufacturer | Model | | Audio-Technica | AT 4073a | | BP 4073 | | AT 835ST | | BP 4029 | | AT 875 | | AT 875R | | AT 877 | | Schoeps | CMIT 5U | | Sony | ECM 673 | | ECM 674 |
|
|
This is suitable for mics up to 14cm in length. Here is a list of some of the compatible mics | 14cm Camera Kit | | Manufacturer | Model | | Audio-Technica | AT 897 | | Neumann | KMR 81i | | Rode | NTG-1 | | NTG-2 | | Sanken | CS 1 |
|
|
This is suitable for mics up to 18cm in length. Here is a list of some of the compatible mics | 18cm Camera Kit | | Manufacturer | Model | | AKG | C 568 EB | | CK 68 ULS C460B | | CK 69 ULS C460B | | Azden | SG(M)-1X | | BeyerDynamic | MC 716 | | MC 726 | | MC 736 | | MC 740 | | MC 742 | | MC 834 | | MC 836 | | MCE 86N (C) S | | MCE 87vs | | MCE 90 | | MCE 58 | | DPA | 4017 | | Rode | NTG-3 | | Sanken | CS 3 | | Sennheiser | ME66 K6 | | ME80 K3U | | MKH 416 | | MKH 60 | | Sony | ECM 670 | | ECM 672 | | ECM 678 | | ECM 680S |
|
|
Rycote's Extension Handle has been designed to allow products with a female 3/8" thread, i.e. portable audio recorder or camera to be either hand-held or mounted on a 3/8" male thread, such as a microphone stand or boom pole.
Thanks to its ergonomic, soft-grip feel, the handle can be used to comfortably hand-hold recording devices, and can be used together with our Portable Recorder Suspension, or InVision Broadcast suspension mounts.
|
|
